企业资料通过认证
三色灯头圈供选择
本公司为满足矿井、油田、钢铁、铁路、电业、公安等企业对移动防爆照明灯具的需要，研制开发的新型免维护LED防爆矿灯，经国家权威机构防爆认证，可在各种易燃易爆场所、水下及其他工作现场安全工作。
▇性能特点
防爆功能 本产品已通过国家权威机构防爆和煤安认证，完全按照国家防爆标准生产，具有优良的防爆、防静电效果，可在各种易燃易爆场所安全工作(包括含有氢、乙炔、甲烷及其他混合气体的环境)。
采用高效率的德国欧司朗5W-LED半导体发光技术，在同等亮度下，节能，无需更换。
质量稳定 高能无记忆锂电池容量高、环保，充放电性能稳定，自放电率低。采用超不碎工程塑料，使产品有高耐冲击性。
防水性能 精密的结构能确保该灯可经受强力碰撞和冲击，外壳防护等级为IP66；
功能独特 采用两套光源，分主灯和备用灯，由一个灯键更换。外形美观，体积小，重量轻，无束缚，减轻工人的负载，提高工作效率。
▇技术参数
KL6M.PLUS Miner's Lamp Manual
(Ⅰ). Application and characteristic KL6M.PLUS is special illuminating lamp for workers carrying individually under mine. This series is our new self-designed generation product. It adopts Li-ion battery, osram-LED double light sources, with smart size and light weight, free aintenance battery, and long life LED.
(Ⅱ).Working conditions:Temperature: -8-40℃
(Ⅲ). Explosion-proof type: Exs I (Ⅳ).Technical Parameter
|
Features |
KL6M.PLUS Specifications |
|
Rated capability |
6.6Ah(li-ion battery) |
|
Rated voltage |
3.7V |
|
Continuous discharging time |
>17h |
|
Main light LED Working voltage |
3.2V |
|
Main light LED Working current |
0.6A |
|
Main light Power |
5W |
|
Main light Luminous flux |
>220Lm |
|
lamp lighting degree (distance 1 meter) |
>20000Lux (at the starting time) |
|
>15000Lux (after 12 hours working time) |
|
|
Main light Usage life hour |
>100000h |
|
Accessory light Usage life hour |
100000h |
|
Short circuit protect time |
<15ms |
|
Usage duration of battery (recharges) |
1000 recharges (in reasonable working condition) |
|
Charging time |
≤14hours |
|
Weight |
<475g |
|
Charing voltage and current |
DC:4.2V○1000mA○2000mA |
(Ⅴ).Structure
- 1. Thisserieslampisportable,the lamp head andbatterypartareconnected bycable's upper coverto be a whole miner's lamp. Lamp head could be fixed oncap lamp.
-
2. Aosram-LEDmainlight sourceisinstalledin,KL6M.PLUS,severalLEDauxiliary light sources. main source and auxiliary sources illuminate alternatively.
- 3. Thisbatterycaseisdesignedwithclosed wear-ring,convenientfor carrying.
- 4. This lamp headisdesignedwithcharging device, matchingwithchargingset,convenientandreliablefor charging.
- 5. PTCself-protectionis setbetweenbatterygroup,andreusable shortcircuitprotective device is set on cable's battery end. Thus, this is very safe and reliable.
(Ⅵ).Usage and maintenance
-
1. Thebatteryischarged with morethan 1/4powerwhenshippedoutof factory, turnontheswitchtomake sureitcanilluminatenormally.If itwasingoodcondition,charge and use it.
-
2. Charge with matched charging set or unit charger.
- 3. Pleaseturnofflamp when charging.
- 4. If any damage happened in using, give it to check department after leavingminewell,andmaintainbyprofessionalpersonwithspecial tool,don'topenlamp yourself, especially under mine.
- 5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacityand life of service would be reduced.
-
6. If lamp head happened short circuit in maintenance or other operation, disposalthe faulty, and restart the lamp, it will work normally.
- 7. If the lamp was not used usually, please charge per three months in storage period.
- 8. Don'tacutely knockorcollidelampincarryingorusing,toavoid damage toanypartstoaffectnormal warning.
-
2. Charge with matched charging set or unit charger.
(Ⅶ).Charging :
1.Charger input: AC100-240V,50-60Hz ,0.4A.2.Charger output : DC :4.2V@1000mA,@2000mA
3.Connect to power supply, plug lamp head into charging socket, clockwise turn 180 degree to make charging points contact well, watch whether the indicator is normal. It will take 12-14 hours to be charged fully.